arm-bsp/trusted-firmware-a: remove unreferenced patches

These patches were moved to meta-arm-bsp for tf-a recipes that have since
been removed.  Remove them now.

Signed-off-by: Jon Mason <jon.mason@arm.com>

meta-arm-bsp/recipes-bsp/trusted-firmware-a/files/0001-fix-zynqmp-handle-secure-SGI-at-EL1-for-OP-TEE.patch

@@ -1,33 +0,0 @@
-From f5b2fa90e0c0324f31e72429e7a7382f49a25912 Mon Sep 17 00:00:00 2001
-From: Shen Jiamin <shen_jiamin@comp.nus.edu.sg>
-Date: Wed, 24 Jul 2024 18:58:55 +0800
-Subject: [PATCH] fix(zynqmp): handle secure SGI at EL1 for OP-TEE
-
-OP-TEE requires SGIs to be handled at S-EL1. The
-Makefile was not properly setting the flag
-GICV2_G0_FOR_EL3 to 0 when the SPD is OP-TEE.
-
-Change-Id: I256afa37ddf4ad4a154c43d51807de670c3689bb
-Signed-off-by: Shen Jiamin <shen_jiamin@comp.nus.edu.sg>
----
- plat/xilinx/zynqmp/platform.mk | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-Upstream-Status: Backport
-
-diff --git a/plat/xilinx/zynqmp/platform.mk b/plat/xilinx/zynqmp/platform.mk
-index c340009d0..22eceb621 100644
---- a/plat/xilinx/zynqmp/platform.mk
-+++ b/plat/xilinx/zynqmp/platform.mk
-@@ -21,7 +21,7 @@ ENABLE_LTO := 1
- EL3_EXCEPTION_HANDLING := $(SDEI_SUPPORT)
- 
- # pncd SPD requires secure SGI to be handled at EL1
--ifeq (${SPD}, $(filter ${SPD},pncd tspd))
-+ifeq (${SPD}, $(filter ${SPD},pncd tspd opteed))
- ifeq (${ZYNQMP_WDT_RESTART},1)
- $(error "Error: ZYNQMP_WDT_RESTART and SPD=pncd are incompatible")
- endif
--- 
-2.34.1
-

meta-arm-bsp/recipes-bsp/trusted-firmware-a/files/0001-qemu_measured_boot.c-ignore-TPM-error-and-continue-w.patch

@@ -1,33 +0,0 @@
-From b91c651e6d596cfe27448b19c8fb2f1168493827 Mon Sep 17 00:00:00 2001
-From: Mikko Rapeli <mikko.rapeli@linaro.org>
-Date: Mon, 15 Jan 2024 09:26:56 +0000
-Subject: [PATCH] qemu_measured_boot.c: ignore TPM error and continue with boot
-
-If firmware is configured with TPM support but it's missing
-on HW, e.g. swtpm not started and/or configured with qemu,
-then continue booting. Missing TPM is not a fatal error.
-Enables testing boot without TPM device to see that
-missing TPM is detected further up the SW stack and correct
-fallback actions are taken.
-
-Upstream-Status: Pending
-
-Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
----
- plat/qemu/qemu/qemu_measured_boot.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/plat/qemu/qemu/qemu_measured_boot.c b/plat/qemu/qemu/qemu_measured_boot.c
-index 76a4da17e6a9..ec7f44d3720d 100644
---- a/plat/qemu/qemu/qemu_measured_boot.c
-+++ b/plat/qemu/qemu/qemu_measured_boot.c
-@@ -80,7 +80,8 @@ void bl2_plat_mboot_finish(void)
- 		 * Note: In QEMU platform, OP-TEE uses nt_fw_config to get the
- 		 * secure Event Log buffer address.
- 		 */
--		panic();
-+		ERROR("Ignoring TPM errors, continuing without\n");
-+		return;
- 	}
- 
- 	/* Copy Event Log to Non-secure memory */