Без опису

Khem Raj 4a827bfff2 parselogs: Update the error regexps to 5.10 kernel 3 роки тому
.github 135a7ae55f PULL_REQUEST_TEMPLATE.md: Add pull request template 8 роки тому
classes c7f4c739a3 sdcard_image-rpi.bbclass: Fix IMAGE_TYPEDEP override to use new syntax 4 роки тому
conf 54213e7127 conf/machine: add variant Wi-Fi/BT drivers for CM4 and Pi 400 3 роки тому
docs da03175b91 Update references to Yocto mailing list 3 роки тому
dynamic-layers 9ea7aa2cd2 Convert to new override syntax 4 роки тому
files ae6611ea46 bcm2835-bootfiles: Clarify license conditions 6 роки тому
img 3fe1f79ea2 README.md: Mention build server sponsor 4 роки тому
lib 4a827bfff2 parselogs: Update the error regexps to 5.10 kernel 3 роки тому
recipes-bsp 7413c72dd5 rpi-config: don't trigger bbfatal for empty ENABLE_UART 3 роки тому
recipes-connectivity e31fba4c96 recipes: Update SRC_URI protocols for github 4 роки тому
recipes-core 9ea7aa2cd2 Convert to new override syntax 4 роки тому
recipes-devtools e31fba4c96 recipes: Update SRC_URI protocols for github 4 роки тому
recipes-graphics e31fba4c96 recipes: Update SRC_URI protocols for github 4 роки тому
recipes-kernel 4c76dab6f0 linux-firmware-rpidistro: Use bullseye branch 3 роки тому
recipes-multimedia e31fba4c96 recipes: Update SRC_URI protocols for github 4 роки тому
recipes-sato 690b4a5e98 libwpe: Migrate build workaround from oe-core 3 роки тому
wic 0e1e2c6e0a sdimage-raspberrypi.wks: find /boot partition on mmcblk0 7 роки тому
.gitignore 3145390785 gitignore: Ignore .pyc files 4 роки тому
.readthedocs.yaml e1411c7520 docs: Add module dependency/requirement for RtD 3 роки тому
COPYING.MIT d6df178702 COPYING.MIT: Add license file for the metadata. 13 роки тому
README.md fed7688925 README.md: Fix the matrix chat link 3 роки тому
kas-poky-rpi.yml 0df167c61f kas: local.conf: disable prelink 4 роки тому

README.md

meta-raspberrypi

Yocto BSP layer for the Raspberry Pi boards - http://www.raspberrypi.org/.

Documentation Status Matrix

Build server sponsored by balena.io

Quick links

Description

This is the general hardware specific BSP overlay for the RaspberryPi device.

More information can be found at: http://www.raspberrypi.org/ (Official Site)

The core BSP part of meta-raspberrypi should work with different OpenEmbedded/Yocto distributions and layer stacks, such as:

  • Distro-less (only with OE-Core).
  • Yoe Disto (Video and Camera Products).
  • Yocto/Poky (main focus of testing).

Dependencies

This layer depends on:

  • URI: git://git.yoctoproject.org/poky

    • branch: master
    • revision: HEAD
  • URI: git://git.openembedded.org/meta-openembedded

    • layers: meta-oe, meta-multimedia, meta-networking, meta-python
    • branch: master
    • revision: HEAD

Quick Start

  1. source poky/oe-init-build-env rpi-build
  2. Add this layer to bblayers.conf and the dependencies above
  3. Set MACHINE in local.conf to one of the supported boards
  4. bitbake core-image-base
  5. Use bmaptool to copy the generated .wic.bz2 file to the SD card
  6. Boot your RPI

Quick Start with kas

  1. Install kas build tool from PyPi (sudo pip3 install kas)
  2. kas build meta-raspberrypi/kas-poky-rpi.yml
  3. Use bmaptool to copy the generated .wic.bz2 file to the SD card
  4. Boot your RPI

To adjust the build configuration with specific options (I2C, SPI, ...), simply add a section as follows:

local_conf_header:
  rpi-specific: |
    ENABLE_I2C = "1"
    RPI_EXTRA_CONFIG = "dtoverlay=pi3-disable-bt"

To configure the machine, you have to update the machine variable. And the same for the distro.

For further information, you can read more at https://kas.readthedocs.io/en/1.0/index.html

Maintainers

  • Andrei Gherzan <andrei at gherzan.com>