Andrei Gherzan
34eef2ea4f
linux-raspberrypi_3.1.9: Fix typo
|
13 年之前 | |
|---|---|---|
| classes | 13 年之前 | |
| conf | 13 年之前 | |
| recipes-bcm | 13 年之前 | |
| recipes-bsp | 13 年之前 | |
| recipes-core | 13 年之前 | |
| recipes-extra | 13 年之前 | |
| recipes-graphics | 13 年之前 | |
| recipes-kernel | 13 年之前 | |
| recipes-multimedia | 13 年之前 | |
| COPYING.MIT | 13 年之前 | |
| README | 13 年之前 | |
| recipes.txt | 13 年之前 |
README
OpenEmbedded BSP Layer - RaspberryPi
--------------------------------------
This is the general hardware specific BSP overlay for the RaspberryPi device.
It should be used with openembedded-core (not old-style org.openembedded.dev).
More information can be found at:
http://www.raspberrypi.org/ (Official Site)
http://www.distant-earth.com/ (My Site)
Build scripts patched to support making a firmware image for the RaspberryPi with Angstrom can be found at:
http://github.com/Angstrom-distribution/setup-scripts
When not depending on meta-openembedded and not using systemd, you may need to
mask few recipes requiring systemd or other recipes not included in your distribution of choice.
You can achieve this by adding something like the following to local.conf:
BBMASK = "meta-raspberrypi/recipes-multimedia/libav|meta-raspberrypi/recipes-core/systemd"
You can adjust the BBMASK for any .bbappends that your distribution does not contain recipes for.
The core BSP part of meta-raspberrypi should work with different OpenEmbedded/Yocto
distributions and layer stacks, such as:
* Distro-less (only with OE-Core).
* Angstrom (main focus of testing).
* Yocto/Poky.
This layer in its entirety depends on:
URI: git://git.openembedded.org/openembedded-core
branch: master
revision: HEAD
URI: git://git.openembedded.org/meta-openembedded
branch: master
revision: HEAD
It is preferred that people raise pull requests using GIThub by forking the appropriate tree:
https://github.com/djwillis/
(More info on achieving this can be found at http://help.github.com/send-pull-requests/)
Yocto BSP Layer - RaspberryPi
-------------------------------
This layer depends on:
URI: git://git.yoctoproject.org/poky
branch: master
revision: HEAD
How to use it:
1. source poky/oe-init-build-env rpi-build
2. Add meta-raspberrypi in bblayers.conf
3 Set MACHINE to raspberrypi in local.conf
4. Modify distro to DISTRO ?= "poky-raspberrypi" in local.conf
5. bitbake rpi-hwup-image
6. dd to a SD card the generated sdimg file
7. Boot your RPI.
Layer maintainer: John Willis
Andrei Gherzan
--------------------------------------
This is the general hardware specific BSP overlay for the RaspberryPi device.
It should be used with openembedded-core (not old-style org.openembedded.dev).
More information can be found at:
http://www.raspberrypi.org/ (Official Site)
http://www.distant-earth.com/ (My Site)
Build scripts patched to support making a firmware image for the RaspberryPi with Angstrom can be found at:
http://github.com/Angstrom-distribution/setup-scripts
When not depending on meta-openembedded and not using systemd, you may need to
mask few recipes requiring systemd or other recipes not included in your distribution of choice.
You can achieve this by adding something like the following to local.conf:
BBMASK = "meta-raspberrypi/recipes-multimedia/libav|meta-raspberrypi/recipes-core/systemd"
You can adjust the BBMASK for any .bbappends that your distribution does not contain recipes for.
The core BSP part of meta-raspberrypi should work with different OpenEmbedded/Yocto
distributions and layer stacks, such as:
* Distro-less (only with OE-Core).
* Angstrom (main focus of testing).
* Yocto/Poky.
This layer in its entirety depends on:
URI: git://git.openembedded.org/openembedded-core
branch: master
revision: HEAD
URI: git://git.openembedded.org/meta-openembedded
branch: master
revision: HEAD
It is preferred that people raise pull requests using GIThub by forking the appropriate tree:
https://github.com/djwillis/
(More info on achieving this can be found at http://help.github.com/send-pull-requests/)
Yocto BSP Layer - RaspberryPi
-------------------------------
This layer depends on:
URI: git://git.yoctoproject.org/poky
branch: master
revision: HEAD
How to use it:
1. source poky/oe-init-build-env rpi-build
2. Add meta-raspberrypi in bblayers.conf
3 Set MACHINE to raspberrypi in local.conf
4. Modify distro to DISTRO ?= "poky-raspberrypi" in local.conf
5. bitbake rpi-hwup-image
6. dd to a SD card the generated sdimg file
7. Boot your RPI.
Layer maintainer: John Willis
Andrei Gherzan