Ei kuvausta

Martin Jansa e5e976da0b python3-adafruit-*: fix branch parameter		3 vuotta sitten
.github	135a7ae55f PULL_REQUEST_TEMPLATE.md: Add pull request template	8 vuotta sitten
classes	e46407bbfb sdcard_image-rpi.bbclass: shorten the default BOOTDD_VOLUME_ID	4 vuotta sitten
conf	e6e604616d layer.conf: Remove older releases from LAYERSERIES_COMPAT	4 vuotta sitten
docs	a5969a681d [documentation]Add USB host support in documentation	4 vuotta sitten
dynamic-layers	494c4ded6f packagegroup-rpi-test: Add python3-sense-hat in a meta-python specific bbappend	4 vuotta sitten
files	ae6611ea46 bcm2835-bootfiles: Clarify license conditions	5 vuotta sitten
img	a6d1c87088 README.md: Mention build server sponsor	4 vuotta sitten
lib	a5626b6189 oeqa: Add 5.4 specific error messages to ignore list	4 vuotta sitten
recipes-bsp	c12b6f5ecd raspberrypi-firmware: Update to 2021-02-25	4 vuotta sitten
recipes-connectivity	4499d60e60 lirc: Move to dynamic-layers	5 vuotta sitten
recipes-core	494c4ded6f packagegroup-rpi-test: Add python3-sense-hat in a meta-python specific bbappend	4 vuotta sitten
recipes-devtools	e5e976da0b python3-adafruit-*: fix branch parameter	3 vuotta sitten
recipes-graphics	62cac69465 raspidmx: Disable for all non-rpi hosts	4 vuotta sitten
recipes-kernel	0e2baa7656 linux-raspberrypi-dev: use static SRCREV when not selected with PREFERRED_PROVIDER_virtual/kernel	4 vuotta sitten
recipes-multimedia	c5bc556873 gstreamer: Fix the compilation issue in meta multimedia image	5 vuotta sitten
wic	0e1e2c6e0a sdimage-raspberrypi.wks: find /boot partition on mmcblk0	7 vuotta sitten
.gitignore	654d84d68a docs: Initial sphinx configuration	8 vuotta sitten
COPYING.MIT	d6df178702 COPYING.MIT: Add license file for the metadata.	13 vuotta sitten
README.md	a6d1c87088 README.md: Mention build server sponsor	4 vuotta sitten
kas-poky-rpi.yml	d058d2a2cf kas-poky-rpi: add kas file	5 vuotta sitten

meta-raspberrypi

Yocto BSP layer for the Raspberry Pi boards - http://www.raspberrypi.org/.


Build server sponsored by	.

Quick links

Git repository web frontend: https://github.com/agherzan/meta-raspberrypi
Mailing list (yocto mailing list): yocto@yoctoproject.org
Issues management (Github Issues): https://github.com/agherzan/meta-raspberrypi/issues
Documentation: http://meta-raspberrypi.readthedocs.io/en/latest/

Description

This is the general hardware specific BSP overlay for the RaspberryPi device.

More information can be found at: http://www.raspberrypi.org/ (Official Site)

The core BSP part of meta-raspberrypi should work with different OpenEmbedded/Yocto distributions and layer stacks, such as:

Distro-less (only with OE-Core).
Yoe Disto (Video and Camera Products).
Yocto/Poky (main focus of testing).

Dependencies

This layer depends on:

URI: git://git.yoctoproject.org/poky
- branch: master
- revision: HEAD
URI: git://git.openembedded.org/meta-openembedded
- layers: meta-oe, meta-multimedia, meta-networking, meta-python
- branch: master
- revision: HEAD

Quick Start

source poky/oe-init-build-env rpi-build
Add this layer to bblayers.conf and the dependencies above
Set MACHINE in local.conf to one of the supported boards
bitbake core-image-base
Use bmaptool to copy the generated .wic.bz2 file to the SD card
Boot your RPI

Quick Start with kas

Install kas build tool from PyPi (sudo pip3 install kas)
kas build meta-raspberrypi/kas-poky-rpi.yml
Use bmaptool to copy the generated .wic.bz2 file to the SD card
Boot your RPI

To adjust the build configuration with specific options (I2C, SPI, ...), simply add a section as follows:

local_conf_header:
  rpi-specific: |
    ENABLE_I2C = "1"
    RPI_EXTRA_CONFIG = "dtoverlay=pi3-disable-bt"

To configure the machine, you have to update the machine variable. And the same for the distro.

For further information, you can read more at https://kas.readthedocs.io/en/1.0/index.html

Maintainers

Andrei Gherzan <andrei at gherzan.ro>

README.md