bsp-guide: WIP Removing yocto-bsp

(From yocto-docs rev: 056cc0c1dab79df6911552a690ca6b4dc302cc8b)

Signed-off-by: Kristi Rifenbark <kristi.rifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

documentation/bsp-guide/bsp.xml

@@ -1612,46 +1612,34 @@
                 <title>Creating a new BSP Layer Using the yocto-bsp Script</title>
 
                 <para>
-                    The <filename>yocto-bsp</filename> script creates a new
-                    <link linkend='bsp-layers'>BSP layer</link> for any architecture supported
-                    by the Yocto Project, as well as QEMU versions of the same.
-                    The default mode of the script's operation is to prompt you for information needed
-                    to generate the BSP layer.
+                    [SOMETHING ABOUT CREATING A GENERAL LAYER USING bitbake-layers SCRIPT]
+                    The [MODIFICATION NAME] sub-command creates a new
+                    <link linkend='bsp-layers'>BSP layer</link> for any architecture
+                    supported by the Yocto Project, as well as QEMU versions of the same.
+                    The default mode of the script's operation is to prompt you for
+                    information needed to generate the BSP layer.
                 </para>
 
                 <para>
-                    For the current set of BSPs, the script prompts you for various important
-                    parameters such as:
+                    For the current set of BSPs, the [SCRIPT] prompts you for various
+                    important parameters such as:
                     <itemizedlist>
-                        <listitem><para>The kernel to use</para></listitem>
-                        <listitem><para>The branch of that kernel to use (or re-use)</para></listitem>
-                        <listitem><para>Whether or not to use X, and if so, which drivers to use</para></listitem>
-                        <listitem><para>Whether to turn on SMP</para></listitem>
-                        <listitem><para>Whether the BSP has a keyboard</para></listitem>
-                        <listitem><para>Whether the BSP has a touchscreen</para></listitem>
-                        <listitem><para>Remaining configurable items associated with the BSP</para></listitem>
+                        <listitem><para>[PAREMETER 1]</para></listitem>
+                        <listitem><para>[PARAMETER 2]</para></listitem>
+                        <listitem><para>[PARAMETER 3]</para></listitem>
+                        <listitem><para>[PARAMETER 4]</para></listitem>
+                        <listitem><para>[PARAMETER 5]</para></listitem>
+                        <listitem><para>[PARAMETER 6]</para></listitem>
+                        <listitem><para>[PARAMETER 7]</para></listitem>
                     </itemizedlist>
                 </para>
 
                 <para>
-                    You use the <filename>yocto-bsp create</filename> sub-command to create
-                    a new BSP layer.
-                    This command requires you to specify a particular kernel architecture
-                    (<filename>karch</filename>) on which to base the BSP.
-                    Assuming you have sourced the environment, you can use the
-                    <filename>yocto-bsp list karch</filename> sub-command to list the
-                    architectures available for BSP creation as follows:
-                    <literallayout class='monospaced'>
-     $ yocto-bsp list karch
-     Architectures available:
-         powerpc
-         x86_64
-         i386
-         arm
-         qemu
-         mips
-         mips64
-                    </literallayout>
+                    [ASSUMING STEP ONE IS RUNNING bitbake-layers TO CREATE GENERIC LAYER - INTRO]
+                    For instructions on how to create a general layer using the
+                    <filename>bitbake-layers</filename> script see the
+                    "<ulink url='&YOCTO_DOCS_DEV_URL;#creating-a-general-layer-using-the-bitbake-layers-script'>Creating a General Layer Using the <filename>bitbake-layers</filename> Script</ulink>"
+                    section.
                 </para>
 
                 <para>
@@ -1667,7 +1655,7 @@
                 </para>
 
                 <para>
-                    As the <filename>yocto-bsp create</filename> command runs, default values for
+                    [ASSUMING SIMLILAR ACTION OCCURS]As the [SUBCOMMAND] command runs, default values for
                     the prompts appear in brackets.
                     Pressing enter without supplying anything on the command line or pressing enter
                     with an invalid response causes the script to accept the default value.
@@ -1681,39 +1669,10 @@
                 <para>
                     Following is the complete example:
                     <literallayout class='monospaced'>
-     $ yocto-bsp create myarm qemu
-     Checking basic git connectivity...
-     Done.
-
-     Which qemu architecture would you like to use? [default: i386]
-	     1) i386    (32-bit)
-	     2) x86_64  (64-bit)
-	     3) ARM     (32-bit)
-	     4) PowerPC (32-bit)
-	     5) MIPS    (32-bit)
-	     6) MIPS64  (64-bit)
-     3
-     Would you like to use the default (4.8) kernel? (y/n) [default: y]
-     Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n] [default: y]
-     Getting branches from remote repo git://git.yoctoproject.org/linux-yocto-4.8.git...
-     Please choose a machine branch to base this BSP on: [default: standard/base]
-	     1) standard/arm-versatile-926ejs
-	     2) standard/base
-	     3) standard/beaglebone
-	     4) standard/edgerouter
-	     5) standard/fsl-mpc8315e-rdb
-	     6) standard/mti-malta32
-	     7) standard/mti-malta64
-	     8) standard/qemuarm64
-	     9) standard/qemuppc
-     1
-     Would you like SMP support? (y/n) [default: y]
-     Does your BSP have a touchscreen? (y/n) [default: n]
-     Does your BSP have a keyboard? (y/n) [default: y]
-
-     New qemu BSP created in meta-myarm
+[INSERT EXAMPLE]
                     </literallayout>
                     Take a closer look at the example now:
+                    [UPDATE EXAMPLE STRUCTURE BASED ON NEW INSTRUCTIONS]
                     <orderedlist>
                         <listitem><para>For the QEMU architecture,
                             the script first prompts you for which emulated architecture to use.
@@ -1765,6 +1724,7 @@
         /usr/local/src/yocto/meta-myarm \
         "
                     </literallayout>
+                    [YOCTO-KERNEL WILL BE REMOVED - THIS NEEDS UPDATED WITH NEW INFO]
                     Adding the layer to this file allows the build system to build the BSP and
                     the <filename>yocto-kernel</filename> tool to be able to find the layer and
                     other Metadata it needs on which to operate.