Make poky-qemu and related scripts work with arbitrary SDK locations

* No longer assume SDK toolchains are installed in /opt/poky
* [BUGFIX #568] where specifying paths to both the kernel and fs
  image caused an error due to POKY_NATIVE_SYSROOT never being
  set, triggering failure of poky-qemu-ifup/ifdown
* Cosmetic improvements to usage() functions by using basename

Signed-off-by: Scott Garman <scott.a.garman@intel.com>

scripts/poky-find-native-sysroot

@@ -1,7 +1,7 @@
 #!/bin/bash
 #
 # Find a native sysroot to use - either from an in-tree Poky build or
-# from a toolchain installation in /opt/poky. It then ensures the variable
+# from a toolchain installation. It then ensures the variable
 # $POKY_NATIVE_SYSROOT is set to the sysroot's base directory, and sets 
 # $PSEUDO to the path of the pseudo binary.
 #

scripts/poky-qemu

@@ -31,9 +31,9 @@ usage() {
     echo "    serial - enables a serial console on /dev/ttyS0"
     echo ""
     echo "Examples:"
-    echo "  $0 qemuarm"
-    echo "  $0 qemux86-64 poky-image-sato ext3"
-    echo "  $0 path/to/bzImage-qemux86.bin path/to/nfsrootdir/ serial"
+    echo "  $MYNAME qemuarm"
+    echo "  $MYNAME qemux86-64 poky-image-sato ext3"
+    echo "  $MYNAME path/to/bzImage-qemux86.bin path/to/nfsrootdir/ serial"
     exit 1
 }
 
@@ -213,23 +213,29 @@ setup_tmpdir() {
                 echo "before running this script" >&2;
                 exit 1; }
 
-            # We have bitbake in PATH, get TMPDIR and BUILD_SYS
-            # from the environment
+            # We have bitbake in PATH, get TMPDIR from bitbake
             TMPDIR=`bitbake -e | grep TMPDIR=\" | cut -d '=' -f2 | cut -d '"' -f2`
-            BUILD_SYS=`bitbake -e | grep BUILD_SYS=\" | cut -d '=' -f2 | cut -d '"' -f2`
         else
-            BUILD_ARCH=`uname -m`
-            BUILD_OS=`uname | tr '[A-Z]' '[a-z]'`
-            BUILD_SYS="$BUILD_ARCH-$BUILD_OS"
             TMPDIR=$BUILDDIR/tmp
         fi
-        if [ -z "$POKY_NATIVE_SYSROOT" ]; then
-            POKY_NATIVE_SYSROOT=$TMPDIR/sysroots/$BUILD_SYS
-        fi
-        CROSSPATH=$POKY_NATIVE_SYSROOT/usr/bin
     fi
 }
 
+setup_sysroot() {
+	# Toolchain installs set up $POKY_NATIVE_SYSROOT in their
+	# environment script. If that variable isn't set, we're
+	# either in an in-tree poky scenario or the environment
+	# script wasn't source'd.
+	if [ -z "$POKY_NATIVE_SYSROOT" ]; then
+		setup_tmpdir
+		BUILD_ARCH=`uname -m`
+		BUILD_OS=`uname | tr '[A-Z]' '[a-z]'`
+		BUILD_SYS="$BUILD_ARCH-$BUILD_OS"
+
+		POKY_NATIVE_SYSROOT=$TMPDIR/sysroots/$BUILD_SYS
+	fi 
+}
+
 # Locate a rootfs image based on defaults defined above
 findimage() {
     where=$1
@@ -254,8 +260,6 @@ findimage() {
 }
 
 if [[ -e "$ROOTFS" && -z "$FSTYPE" ]]; then
-    setup_tmpdir
-
     # Extract the filename extension
     EXT=`echo $ROOTFS | awk -F . '{ print \$NF }'`
     if [[ "x$EXT" == "xext2" || "x$EXT" == "xext3" || 
@@ -281,7 +285,6 @@ fi
 # KERNEL is now set for all cases
 
 if [ -z "$FSTYPE" ]; then
-    setup_tmpdir
     eval FSTYPE=\$${machine2}_DEFAULT_FSTYPE
 
     if [ -z "$FSTYPE" ]; then
@@ -318,6 +321,9 @@ echo "KERNEL: [$KERNEL]"
 echo "ROOTFS: [$ROOTFS]"
 echo "FSTYPE: [$FSTYPE]"
 
+setup_sysroot
+# POKY_NATIVE_SYSROOT is now set for all cases
+
 # We can't run without a libGL.so
 libgl='no'
 

scripts/poky-qemu-ifdown

@@ -27,7 +27,7 @@
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
 usage() {
-	echo "sudo $0 <tap-dev> <native-sysroot-basedir>"
+	echo "sudo $(basename $0) <tap-dev> <native-sysroot-basedir>"
 }
 
 if [ $EUID -ne 0 ]; then
@@ -46,13 +46,6 @@ NATIVE_SYSROOT_DIR=$2
 TUNCTL=$NATIVE_SYSROOT_DIR/usr/bin/tunctl
 if [ ! -e "$TUNCTL" ]; then
 	echo "Error: Unable to find tunctl binary in '$NATIVE_SYSROOT_DIR/usr/bin'"
-
-	if [[ "$NATIVE_SYSROOT_DIR" =~ ^\/opt\/poky ]]; then
-		echo "This shouldn't happen - something is wrong with your toolchain installation"
-	else
-		echo "Have you run 'bitbake meta-ide-support'?"
-	fi
-
 	exit 1
 fi
 

scripts/poky-qemu-ifup

@@ -34,7 +34,7 @@
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
 usage() {
-	echo "sudo $0 <gid> <native-sysroot-basedir>"
+	echo "sudo $(basename $0) <gid> <native-sysroot-basedir>"
 }
 
 if [ $EUID -ne 0 ]; then
@@ -53,13 +53,6 @@ NATIVE_SYSROOT_DIR=$2
 TUNCTL=$NATIVE_SYSROOT_DIR/usr/bin/tunctl
 if [ ! -x "$TUNCTL" ]; then
 	echo "Error: Unable to find tunctl binary in '$NATIVE_SYSROOT_DIR/usr/bin'"
-
-	if [[ "$NATIVE_SYSROOT_DIR" =~ ^\/opt\/poky ]]; then
-		echo "This shouldn't happen - something is wrong with your toolchain installation"
-	else
-		echo "Have you run 'bitbake meta-ide-support'?"
-	fi
-	
 	exit 1
 fi
 

scripts/poky-qemu-internal

@@ -394,23 +394,9 @@ if [ "x$QEMUOPTIONS" = "x" ]; then
     return
 fi
 
-SDKDIR="/opt/poky/sysroots"
-if [ "$MACHINE" = "qemuarm" -o "$MACHINE" = "spitz" -o "$MACHINE" = "borzoi" -o "$MACHINE" = "akita" -o "$MACHINE" = "nokia800" ]; then
-    SDKPATH="$SDKDIR/arm-poky-linux-gnueabi/bin"
-fi
-
-if [ "$MACHINE" = "qemux86" ]; then
-    SDKPATH="$SDKDIR/i586-poky-linux/bin"
-fi
-
-if [ "$MACHINE" = "qemux86-64" ]; then
-    SDKPATH="$SDKDIR/x86_64-poky-linux/bin"
-fi
-
-PATH=$CROSSPATH:$SDKPATH:$PATH
+PATH=$CROSSPATH:$POKY_NATIVE_SYSROOT/usr/bin:$PATH
 
 QEMUBIN=`which $QEMU`
-
 if [ ! -x "$QEMUBIN" ]; then
     echo "Error: No QEMU binary '$QEMU' could be found."
     cleanup