Fix dead links that use the DISTRO macro

After introducing the DISTRO_LATEST_TAG and DISTRO_REL_LATEST_TAG
macros, use them in links that currently use DISTRO/DISTRO_REL_TAG. When
building for the tip of a branch, this will replace the current A.B.999
in links to the latest existing tag.

The links were found across the documentation by running 'grep -r
"http.*5\.2\.999"' inside the _build/html output after building the
docs.

[YOCTO #14802]

(From yocto-docs rev: 29be069ebbf2c55d72fc51d99ed5a558af37c05e)

Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

documentation/bsp-guide/bsp.rst

@@ -166,7 +166,7 @@ section.
    BSPs, which are maintained in their own layers or in layers designed
    to contain several BSPs. To get an idea of machine support through
    BSP layers, you can look at the
-   :yocto_dl:`index of machines </releases/yocto/yocto-&DISTRO;/machines>`
+   :yocto_dl:`index of machines </releases/yocto/&DISTRO_REL_LATEST_TAG;/machines>`
    for the release.
 
 #. *Optionally Clone the meta-intel BSP Layer:* If your hardware is

documentation/dev-manual/qemu.rst

@@ -75,7 +75,7 @@ available. Follow these general steps to run QEMU:
       your :term:`Build Directory`.
 
    -  If you have not built an image, you can go to the
-      :yocto_dl:`machines/qemu </releases/yocto/yocto-&DISTRO;/machines/qemu/>` area and download a
+      :yocto_dl:`machines/qemu </releases/yocto/&DISTRO_REL_LATEST_TAG;/machines/qemu/>` area and download a
       pre-built image that matches your architecture and can be run on
       QEMU.
 

documentation/dev-manual/start.rst

@@ -615,7 +615,7 @@ Accessing Source Archives
 The Yocto Project also provides source archives of its releases, which
 are available on :yocto_dl:`/releases/yocto/`. Then, choose the subdirectory
 containing the release you wish to use, for example
-:yocto_dl:`yocto-&DISTRO; </releases/yocto/yocto-&DISTRO;/>`.
+:yocto_dl:`&DISTRO_REL_LATEST_TAG; </releases/yocto/&DISTRO_REL_LATEST_TAG;/>`.
 
 You will find there source archives of individual components (if you wish
 to use them individually), and of the corresponding Poky release bundling

documentation/ref-manual/system-requirements.rst

@@ -393,7 +393,7 @@ If you would prefer not to use the ``install-buildtools`` script, you can instea
 download and run a pre-built :term:`buildtools` installer yourself with the following
 steps:
 
-#. Go to :yocto_dl:`/releases/yocto/yocto-&DISTRO;/buildtools/`, locate and
+#. Go to :yocto_dl:`/releases/yocto/&DISTRO_REL_LATEST_TAG;/buildtools/`, locate and
    download the ``.sh`` file corresponding to your host architecture
    and to :term:`buildtools`, :term:`buildtools-extended` or :term:`buildtools-make`.
 

documentation/ref-manual/terms.rst

@@ -452,7 +452,7 @@ universal, the list includes them just in case:
      the Source Directory, if you do, the top-level directory name of the
      Source Directory is derived from the Yocto Project release tarball.
      For example, downloading and unpacking poky tarballs from
-     :yocto_dl:`/releases/yocto/&DISTRO_REL_TAG;/`
+     :yocto_dl:`/releases/yocto/&DISTRO_REL_LATEST_TAG;/`
      results in a Source Directory whose root folder is named poky.
 
 

documentation/sdk-manual/appendix-obtain.rst

@@ -29,7 +29,7 @@ and then run the script to hand-install the toolchain.
 Follow these steps to locate and hand-install the toolchain:
 
 #. *Go to the Installers Directory:* Go to
-   :yocto_dl:`/releases/yocto/yocto-&DISTRO;/toolchain/`
+   :yocto_dl:`/releases/yocto/&DISTRO_REL_LATEST_TAG;/toolchain/`
 
 #. *Open the Folder for Your Build Host:* Open the folder that matches
    your :term:`Build Host` (i.e.
@@ -201,7 +201,7 @@ Follow these steps to extract the root filesystem:
    Image File:* You need to find and download the root filesystem image
    file that is appropriate for your target system. These files are kept
    in machine-specific folders in the
-   :yocto_dl:`Index of Releases </releases/yocto/yocto-&DISTRO;/machines/>`
+   :yocto_dl:`Index of Releases </releases/yocto/&DISTRO_REL_LATEST_TAG;/machines/>`
    in the "machines" directory.
 
    The machine-specific folders of the "machines" directory contain
@@ -245,7 +245,7 @@ Follow these steps to extract the root filesystem:
 
    Here is an example command that extracts the root filesystem
    from a previously built root filesystem image that was downloaded
-   from the :yocto_dl:`Index of Releases </releases/yocto/yocto-&DISTRO;/machines/>`.
+   from the :yocto_dl:`Index of Releases </releases/yocto/&DISTRO_REL_LATEST_TAG;/machines/>`.
    This command extracts the root filesystem into the ``core2-64-sato``
    directory::
 

documentation/sdk-manual/extensible.rst

@@ -87,7 +87,7 @@ Host` by running the ``*.sh`` installation script.
 You can download a tarball installer, which includes the pre-built
 toolchain, the ``runqemu`` script, the internal build system,
 ``devtool``, and support files from the appropriate
-:yocto_dl:`toolchain </releases/yocto/yocto-&DISTRO;/toolchain/>` directory within the Index of
+:yocto_dl:`toolchain </releases/yocto/&DISTRO_REL_LATEST_TAG;/toolchain/>` directory within the Index of
 Releases. Toolchains are available for several 32-bit and 64-bit
 architectures with the ``x86_64`` directories, respectively. The
 toolchains the Yocto Project provides are based off the

documentation/sdk-manual/intro.rst

@@ -173,7 +173,7 @@ You just need to follow these general steps:
    root filesystem images.
 
    If you are going to develop your application on hardware, go to the
-   :yocto_dl:`machines </releases/yocto/yocto-&DISTRO;/machines/>` download area and choose a
+   :yocto_dl:`machines </releases/yocto/&DISTRO_REL_LATEST_TAG;/machines/>` download area and choose a
    target machine area from which to download the kernel image and root
    filesystem. This download area could have several files in it that
    support development using actual hardware. For example, the area
@@ -183,7 +183,7 @@ You just need to follow these general steps:
 
    If you are going to develop your application and then run and test it
    using the QEMU emulator, go to the
-   :yocto_dl:`machines/qemu </releases/yocto/yocto-&DISTRO;/machines/qemu>` download area. From this
+   :yocto_dl:`machines/qemu </releases/yocto/&DISTRO_REL_LATEST_TAG;/machines/qemu>` download area. From this
    area, go down into the directory for your target architecture (e.g.
    ``qemux86_64`` for an Intel-based 64-bit architecture). Download the
    kernel, root filesystem, and any other files you need for your

documentation/sdk-manual/using.rst

@@ -43,7 +43,7 @@ Host` by running the ``*.sh`` installation script.
 
 You can download a tarball installer, which includes the pre-built
 toolchain, the ``runqemu`` script, and support files from the
-appropriate :yocto_dl:`toolchain </releases/yocto/yocto-&DISTRO;/toolchain/>` directory within
+appropriate :yocto_dl:`toolchain </releases/yocto/&DISTRO_REL_LATEST_TAG;/toolchain/>` directory within
 the Index of Releases. Toolchains are available for several 32-bit and
 64-bit architectures with the ``x86_64`` directories, respectively. The
 toolchains the Yocto Project provides are based off the