documentation: Purged "oe-init-build-env-memres" from docs

Fixes [YOCTO #11968]

Purged all occurrences of the "oe-init-build-env-memres" script
from the YP documentation set.  Occurrences in a lot of places.
The BBSERVER variable was also impacted and had to have the
definition updated.

(From yocto-docs rev: 274b05108d1bc53df20c11ab2efa15363bce23da)

Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

documentation/bsp-guide/bsp.xml

@@ -99,11 +99,9 @@
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-BBLAYERS'><filename>BBLAYERS</filename></ulink>
                 variable in the <filename>conf/bblayers.conf</filename> file found in the
                 <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
-                which is established after you run one of the OpenEmbedded build environment
-                setup scripts (i.e.
-                <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
-                and
-                <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>).
+                which is established after you run the OpenEmbedded build environment
+                setup script (i.e.
+                <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>).
                 Adding the root allows the OpenEmbedded build system to recognize the BSP
                 definition and from it build an image.
                 Here is an example:
@@ -282,13 +280,6 @@
                         <ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>.
                         After the script runs, your current working directory
                         is set to the <filename>build</filename> directory.
-                        <note>
-                            For information on running a memory-resident
-                            <ulink url='&YOCTO_DOCS_REF_URL;#usingpoky-components-bitbake'>BitBake</ulink>,
-                            see the
-                            <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>
-                            setup script.
-                        </note>
                         </para></listitem>
                 </orderedlist>
             </para>
@@ -1018,8 +1009,7 @@
                         your image.
                         You need to get the build environment ready by
                         sourcing an environment setup script
-                        (i.e. <filename>oe-init-build-env</filename> or
-                        <filename>oe-init-build-env-memres</filename>)
+                        (i.e. <filename>oe-init-build-env</filename>)
                         and you need to be sure two key configuration
                         files are configured appropriately: the
                         <filename>conf/local.conf</filename> and the

documentation/dev-manual/dev-manual-common-tasks.xml

@@ -1535,9 +1535,7 @@
                     <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
                     and have sourced the build environment setup script
                     (i.e.
-                    <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>oe-init-build-env</filename></ulink>
-                    or
-                    <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>).
+                    <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>oe-init-build-env</filename></ulink>).
                     Here is the basic <filename>recipetool</filename> syntax:
                     <note>
                         Running <filename>recipetool -h</filename> or
@@ -1718,10 +1716,8 @@
             </para>
 
             <para>
-                Assuming you have sourced a build environment setup script (i.e.
-                <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
-                or
-                <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>)
+                Assuming you have sourced the build environment setup script (i.e.
+                <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>)
                 and you are in the
                 <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
                 use BitBake to process your recipe.
@@ -4959,11 +4955,9 @@
                             </literallayout>
                             </para></listitem>
                         <listitem><para>
-                            You must have sourced one of the build environment
-                            setup scripts (i.e.
-                            <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
-                            or
-                            <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>)
+                            You must have sourced the build environment
+                            setup script (i.e.
+                            <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>)
                             found in the
                             <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
                             </para></listitem>
@@ -5052,8 +5046,6 @@
                     artifacts ready and available.
                     Additionally, the environment must be set up using the
                     <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
-                    or
-                    <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>
                     script found in the
                     <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
                 </para>
@@ -6195,8 +6187,6 @@ Some notes from Cal:
                 environment, you must launch it using BitBake.
                 Thus, the environment must be set up using the
                 <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
-                or
-                <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>
                 script found in the
                 <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
                 You must also be sure of the state of your build in the
@@ -7062,12 +7052,10 @@ Some notes from Cal:
             Aside from the <filename>*.sample</filename> configuration files,
             the <filename>conf-notes.txt</filename> also resides in the
             default <filename>meta-poky/conf</filename> directory.
-            The scripts that set up the build environment
+            The script that sets up the build environment
             (i.e.
-            <ulink url="&YOCTO_DOCS_REF_URL;#structure-core-script"><filename>&OE_INIT_FILE;</filename></ulink>
-            and
-            <ulink url="&YOCTO_DOCS_REF_URL;#structure-memres-core-script"><filename>oe-init-build-env-memres</filename></ulink>)
-            use this file to display BitBake targets as part of the script
+            <ulink url="&YOCTO_DOCS_REF_URL;#structure-core-script"><filename>&OE_INIT_FILE;</filename></ulink>)
+            uses this file to display BitBake targets as part of the script
             output.
             Customizing this <filename>conf-notes.txt</filename> file is a
             good way to make sure your list of custom targets appears

documentation/dev-manual/dev-manual-qemu.xml

@@ -43,9 +43,7 @@
                             repository or you downloaded and unpacked a
                             Yocto Project release tarball, you can source
                             the build environment script (i.e.
-                            <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
-                            or
-                            <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>):
+                            <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>):
                             <literallayout class='monospaced'>
      $ cd ~/poky
      $ source oe-init-build-env

documentation/dev-manual/dev-manual-start.xml

@@ -707,11 +707,9 @@
                 </para></listitem>
             <listitem><para>
                 <emphasis>Initialize the Build Environment:</emphasis>
-                Initialize the build environment by sourcing a build
+                Initialize the build environment by sourcing the build
                 environment script (i.e.
-                <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
-                or
-                <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>).
+                <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>).
                 </para></listitem>
             <listitem><para>
                 <emphasis>Make Sure Your <filename>local.conf</filename>

documentation/kernel-dev/kernel-dev-common.xml

@@ -72,9 +72,7 @@
                         Before building an extensible SDK, you need to
                         initialize the BitBake build environment by sourcing a
                         build environment script
-                        (i.e. <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>oe-init-build-env</filename></ulink>
-                        or
-                        <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>):
+                        (i.e. <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>oe-init-build-env</filename></ulink>):
                         <literallayout class='monospaced'>
      $ cd ~/poky
      $ source oe-init-build-env

documentation/ref-manual/faq.xml

@@ -699,9 +699,7 @@
                 When you use BitBake to build an image, all the build output
                 goes into the directory created when you run the
                 build environment setup script (i.e.
-                <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-                or
-                <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>).
+                <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>).
                 By default, this
                 <link linkend='build-directory'>Build Directory</link>
                 is named <filename>build</filename> but can be named

documentation/ref-manual/introduction.xml

@@ -546,9 +546,7 @@
                         On the machine that is able to run BitBake,
                         be sure you have set up your build environment with
                         the setup script
-                        (<link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-                        or
-                        <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>).
+                        (<link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>).
                         </para></listitem>
                     <listitem><para>
                         Run the BitBake command to build the tarball:
@@ -711,9 +709,7 @@
                 system for builds.
                 The area is created when you <filename>source</filename> the
                 setup environment script that is found in the Source Directory
-                (i.e. <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-                or
-                <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>).
+                (i.e. <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>).
                 The
                 <link linkend='var-TOPDIR'><filename>TOPDIR</filename></link>
                 variable points to the Build Directory.</para>

documentation/ref-manual/ref-development-environment.xml

@@ -1221,9 +1221,7 @@
             configuration files when you source the build environment
             script
             (i.e.
-            <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-            or
-            <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>).
+            <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>).
         </para>
 
         <para>
@@ -1242,8 +1240,7 @@
         <para>
             Because the Poky repository is fundamentally an aggregation of
             existing repositories, some users might be familiar with running
-            the <filename>&OE_INIT_FILE;</filename> or
-            <filename>oe-init-build-env-memres</filename> script in the context
+            the <filename>&OE_INIT_FILE;</filename> script in the context
             of separate OpenEmbedded-Core and BitBake repositories rather than a
             single Poky repository.
             This discussion assumes the script is executed from within a cloned

documentation/ref-manual/ref-structure.xml

@@ -54,10 +54,8 @@
             When you run the <filename>bitbake</filename> command, the
             main BitBake executable, which resides in the
             <filename>bitbake/bin/</filename> directory, starts.
-            Sourcing an environment setup script (e.g.
-            <link linkend="structure-core-script"><filename>&OE_INIT_FILE;</filename></link>
-            or
-            <link linkend="structure-memres-core-script"><filename>oe-init-build-env-memres</filename></link>)
+            Sourcing the environment setup script (i.e.
+            <link linkend="structure-core-script"><filename>&OE_INIT_FILE;</filename></link>)
             places the <filename>scripts</filename> and
             <filename>bitbake/bin</filename> directories (in that order) into
             the shell's <filename>PATH</filename> environment variable.
@@ -81,9 +79,7 @@
             is created initially when you <filename>source</filename>
             the OpenEmbedded build environment setup script
             (i.e.
-            <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-            or
-            <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>).
+            <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>).
         </para>
 
         <para>
@@ -94,10 +90,8 @@
             the setup script.
             For information on separating output from your local
             Source Directory files, see the
-            "<link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-            and
-            "<link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>"
-            sections.
+            "<link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>"
+            section.
         </para>
     </section>
 
@@ -177,9 +171,7 @@
             This directory contains various integration scripts that implement
             extra functionality in the Yocto Project environment (e.g. QEMU scripts).
             The <link linkend="structure-core-script"><filename>&OE_INIT_FILE;</filename></link>
-            and
-            <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>
-            scripts append this directory to the shell's
+            script appends this directory to the shell's
             <filename>PATH</filename> environment variable.
         </para>
 
@@ -194,14 +186,7 @@
         <title><filename>&OE_INIT_FILE;</filename></title>
 
         <para>
-            This script is one of two scripts that set up the OpenEmbedded build
-            environment.
-            For information on the other script, see the
-            "<link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>"
-            section.
-        </para>
-
-        <para>
+            This script sets up the OpenEmbedded build environment.
             Running this script with the <filename>source</filename> command in
             a shell makes changes to <filename>PATH</filename> and sets other
             core BitBake variables based on the current working directory.
@@ -280,157 +265,6 @@
         </para>
     </section>
 
-    <section id='structure-memres-core-script'>
-        <title><filename>oe-init-build-env-memres</filename></title>
-
-        <para>
-            This script is one of two scripts that set up the OpenEmbedded
-            build environment.
-            Aside from setting up the environment, this script starts a
-            memory-resident BitBake server.
-            For information on the other setup script, see the
-            "<link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>"
-            section.
-        </para>
-
-        <para>
-            Memory-resident BitBake resides in memory until you specifically
-            remove it using the following BitBake command:
-            <literallayout class='monospaced'>
-     $ bitbake -m
-            </literallayout>
-        </para>
-
-        <para>
-            Running this script with the <filename>source</filename> command in
-            a shell makes changes to <filename>PATH</filename> and sets other
-            core BitBake variables based on the current working directory.
-            One of these variables is the
-            <link linkend='var-BBSERVER'><filename>BBSERVER</filename></link>
-            variable, which allows the OpenEmbedded build system to locate
-            the server that is running BitBake.
-        </para>
-
-        <para>
-            You need to run an environment setup script before using BitBake
-            commands.
-            Following is the script syntax:
-            <literallayout class='monospaced'>
-     $ source oe-init-build-env-memres <replaceable>port_number</replaceable> <replaceable>build_dir</replaceable>
-            </literallayout>
-            Following are some considerations when sourcing this script:
-            <itemizedlist>
-                <listitem><para>
-                    The script uses other scripts within the
-                    <filename>scripts</filename> directory to do the bulk of
-                    the work.
-                    </para></listitem>
-                <listitem><para>
-                    If you do not provide a port number with the script, the
-                    BitBake server starts at a randomly selected port.
-                    </para></listitem>
-                <listitem><para>
-                    The script's parameters are positionally dependent.
-                    Consequently, you cannot run the script and provide a
-                    <link linkend='build-directory'>Build Directory</link>
-                    name without also providing a port number.
-                    In other words, the following syntax is illegal:
-                    <literallayout class='monospaced'>
-     $ source oe-initbuild-env-memres <replaceable>build_dir</replaceable>
-                    </literallayout>
-                    <note>
-                        The previous restriction might be resolved in the
-                        future.
-                        See
-                        <ulink url='https://bugzilla.yoctoproject.org/show_bug.cgi?id=7555'>Bug 7555</ulink>
-                        for more information.
-                    </note>
-                    </para></listitem>
-            </itemizedlist>
-        </para>
-
-        <para>
-            When you run this script, your Yocto Project environment is set
-            up, a Build Directory is created, your working directory becomes
-            the Build Directory, and you are presented with a list of common
-            BitBake targets.
-            Here is an example:
-            <literallayout class='monospaced'>
-     $ source oe-init-build-env-memres
-     No port specified, using dynamically selected port
-
-     ### Shell environment set up for builds. ###
-
-     You can now run 'bitbake &lt;target&gt;'
-
-     Common targets are:
-         core-image-minimal
-         core-image-sato
-         meta-toolchain
-         meta-ide-support
-
-     You can also run generated qemu images with a command like 'runqemu qemux86'
-     Bitbake server address: 127.0.0.1, server port: 53995
-     Bitbake server started on demand as needed, use bitbake -m to shut it down
-            </literallayout>
-            The script gets its default list of common targets from the
-            <filename>conf-notes.txt</filename> file, which is found in the
-            <filename>meta-poky</filename> directory within the
-            <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
-            Should you have custom distributions, it is very easy to modify
-            this configuration file to include your targets for your
-            distribution.
-            See the
-            "<ulink url='&YOCTO_DOCS_DEV_URL;#creating-a-custom-template-configuration-directory'>Creating a Custom Template Configuration Directory</ulink>"
-            section in the Yocto Project Development Manual for more
-            information.
-        </para>
-
-        <para>
-            By default, running this script without a
-            <link linkend='build-directory'>Build Directory</link>
-            argument creates a build directory named
-            <filename>build</filename>.
-            If you provide a Build Directory argument and port number when you
-            <filename>source</filename> the script, the Build Directory is
-            created using that name.
-            For example, the following command starts the BitBake server using
-            port 53995 and creates a Build Directory named
-            <filename>mybuilds</filename> that is outside of the
-            <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>:
-            <literallayout class='monospaced'>
-     $ source oe-init-build-env-memres 53995 ~/mybuilds
-            </literallayout>
-            The <filename>oe-init-build-env-memres</filename> script starts a
-            memory resident BitBake server.
-            This BitBake instance uses the
-            <filename>bitbake-cookerdaemon.log</filename> file, which is
-            located in the Build Directory.
-        </para>
-
-        <para>
-            The OpenEmbedded build system uses the template configuration
-            files, which are found by default in the
-            <filename>meta-poky/conf</filename> directory in the
-            <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
-            See the
-            "<ulink url='&YOCTO_DOCS_DEV_URL;#creating-a-custom-template-configuration-directory'>Creating a Custom Template Configuration Directory</ulink>"
-            section in the Yocto Project Development Manual for more
-            information.
-            <note>
-                The OpenEmbedded build system does not support file or
-                directory names that contain spaces.
-                If you attempt to run the
-                <filename>oe-init-build-env-memres</filename> script
-                from a Source Directory that contains spaces in either the
-                filenames or directory names, the script returns an error
-                indicating no such file or directory.
-                Be sure to use a Source Directory free of names containing
-                spaces.
-            </note>
-        </para>
-    </section>
-
     <section id='structure-basic-top-level'>
         <title><filename>LICENSE, README, and README.hardware</filename></title>
 
@@ -446,10 +280,8 @@
     <para>
         The OpenEmbedded build system creates the
         <link linkend='build-directory'>Build Directory</link>
-        when you run one of the build environment setup scripts (i.e.
-        <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-        or
-        <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>).
+        when you run the build environment setup scripts (i.e.
+        <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>).
     </para>
 
     <para>
@@ -507,9 +339,7 @@
             <filename>local.conf.sample</filename> when
             you <filename>source</filename> the top-level build environment
             setup script (i.e.
-            <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-            or
-            <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>).
+            <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>).
         </para>
 
         <para>
@@ -561,9 +391,7 @@
             <filename>bblayers.conf.sample</filename> when
             you <filename>source</filename> the top-level build environment
             setup script (i.e.
-            <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-            or
-            <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>).
+            <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>).
         </para>
 
         <para>

documentation/ref-manual/ref-variables.xml

@@ -1299,29 +1299,29 @@
 
         <glossentry id='var-BBSERVER'><glossterm>BBSERVER</glossterm>
             <info>
-                BBSERVER[doc] = "Points to the server that runs memory-resident BitBake."
+                BBSERVER[doc] = "Points to the BitBake remote server."
             </info>
             <glossdef>
                 <para role="glossdeffirst">
 <!--                <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
-                    Points to the server that runs memory-resident BitBake.
-                    This variable is set by the
-                    <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>
-                    setup script and should not be hand-edited.
-                    The variable is only used when you employ memory-resident
-                    BitBake.
-                    The setup script exports the value as follows:
+                    If defined in the BitBake environment,
+                    <filename>BBSERVER</filename> points to the BitBake
+                    remote server.
+                </para>
+
+                <para>
+                    Use the following format to export the variable to the
+                    BitBake environment:
                     <literallayout class='monospaced'>
-     export BBSERVER=localhost:$port
+     export BBSERVER=localhost:$port"
                     </literallayout>
                 </para>
 
                 <para>
-                    For more information on how the
-                    <filename>BBSERVER</filename> is used, see the
-                    <filename>oe-init-build-env-memres</filename> script, which
-                    is located in the
-                    <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
+                    By default, <filename>BBSERVER</filename> also appears in
+                    <ulink url='&YOCTO_DOCS_BB_URL;#var-BB_HASHBASE_WHITELIST'><filename>BB_HASHBASE_WHITELIST</filename></ulink>.
+                    Consequently, <filename>BBSERVER</filename> is excluded
+                    from checksum and dependency data.
                 </para>
             </glossdef>
         </glossentry>
@@ -1736,11 +1736,9 @@
                     <link linkend='build-directory'>Build Directory</link>.
                     You can define this directory indirectly through the
                     <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-                    and
-                    <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>
-                    scripts by passing in a Build Directory path when you run
-                    the scripts.
-                    If you run the scripts and do not provide a Build Directory
+                    script by passing in a Build Directory path when you run
+                    the script.
+                    If you run the script and do not provide a Build Directory
                     path, the <filename>BUILDDIR</filename> defaults to
                     <filename>build</filename> in the current directory.
                 </para>
@@ -6626,7 +6624,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                         recipe in the
                         <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>
                         for an example initramfs recipe.
-                        To select this sample recipe as the one bulit
+                        To select this sample recipe as the one built
                         to provide the initramfs image,
                         set <filename>INITRAMFS_IMAGE</filename> to
                         "core-image-minimal-initramfs".
@@ -9026,19 +9024,17 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
 <!--                <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
                     The directory from which the top-level build environment
                     setup script is sourced.
-                    The Yocto Project makes two top-level build environment
-                    setup scripts available:
-                    <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-                    and
-                    <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>.
-                    When you run one of these scripts, the
+                    The Yocto Project provides a top-level build environment
+                    setup script:
+                    <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>.
+                    When you run this script, the
                     <filename>OEROOT</filename> variable resolves to the
                     directory that contains the script.
                 </para>
 
                 <para>
                     For additional information on how this variable is used,
-                    see the initialization scripts.
+                    see the initialization script.
                 </para>
             </glossdef>
         </glossentry>
@@ -15089,10 +15085,8 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                     The top-level
                     <link linkend='build-directory'>Build Directory</link>.
                     BitBake automatically sets this variable when you
-                    initialize your build environment using either
-                    <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-                    or
-                    <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>.
+                    initialize your build environment using
+                    <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>.
                 </para>
             </glossdef>
         </glossentry>

documentation/ref-manual/usingpoky.xml

@@ -42,11 +42,9 @@
 
         <para>
             The first thing you need to do is set up the OpenEmbedded build
-            environment by sourcing an environment setup script
+            environment by sourcing the environment setup script
             (i.e.
-            <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-            or
-            <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>).
+            <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>).
             Here is an example:
             <literallayout class='monospaced'>
      $ source &OE_INIT_FILE; [<replaceable>build_dir</replaceable>]

documentation/sdk-manual/sdk-appendix-customizing.xml

@@ -148,9 +148,7 @@
             <listitem><para>
                 If your OpenEmbedded build system setup uses a different
                 environment setup script other than
-                <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
-                or
-                <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>,
+                <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>,
                 then you must set
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-OE_INIT_ENV_SCRIPT'><filename>OE_INIT_ENV_SCRIPT</filename></ulink>
                 to point to the environment setup script you use.

documentation/sdk-manual/sdk-appendix-obtain.xml

@@ -142,13 +142,6 @@
                 <ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>.
                 After the script runs, your current working directory
                 is set to the <filename>build</filename> directory.
-                <note>
-                    For information on running a memory-resident
-                    <ulink url='&YOCTO_DOCS_REF_URL;#usingpoky-components-bitbake'>BitBake</ulink>,
-                    see the
-                    <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>
-                    setup script.
-                </note>
                 </para></listitem>
             <listitem><para>
                 <emphasis>Make Sure You Are Building an Installer for the Correct Machine:</emphasis>

documentation/yocto-project-qs/yocto-project-qs.xml

@@ -602,13 +602,6 @@
                         is set to the Build Directory.
                         Later, when the build completes, the Build Directory
                         contains all the files created during the build.
-                        <note>
-                            For information on running a memory-resident
-                            <ulink url='&YOCTO_DOCS_REF_URL;#usingpoky-components-bitbake'>BitBake</ulink>,
-                            see the
-                            <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>
-                            setup script.
-                        </note>
                         </para></listitem>
                     <listitem><para>
                         <emphasis>Examine Your Local Configuration File:</emphasis>