documentation: Re-write of dev-manual setup chapter

Fixes [YOCTO #11630]

The chapter on setting up YP has been completely re-written to
move towards a "how-to" manual.  This involved touching every
aspect of the chapter.  All subsections now have procedures
surrounding set up stuff.  There are some development sections that
still need fleshed out.

Many, many links and references in other chapters were affected.
These have been fixed.

A couple style-sheet (*.css) files were also updated to support the
"writernotes" style, which renders paragraph text in red.

(From yocto-docs rev: c4c2a6cf575ce5c783b1cc84d9f7e961aebef49c)

Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

documentation/bsp-guide/bsp.xml

@@ -87,7 +87,7 @@
                 section in the Yocto Project Development Manual.
                 For more information on how to set up a local copy of source files
                 from a Git repository, see the
-                "<ulink url='&YOCTO_DOCS_DEV_URL;#getting-setup'>Getting Set Up</ulink>"
+                "<ulink url='&YOCTO_DOCS_DEV_URL;#working-with-yocto-project-source-files'>Working With Yocto Project Source Files</ulink>"
                 section also in the Yocto Project Development Manual.
             </para>
 

documentation/dev-manual/dev-manual-model.xml

@@ -130,14 +130,17 @@
                     process and to the tools you need.
                     For information on how to set up the Source Directory,
                     see the
-                    "<link linkend='getting-setup'>Getting Set Up</link>" section.</para></listitem>
+                    "<link linkend='working-with-yocto-project-source-files'>Working With Yocto Project Source Files</link>"
+                    section.
+                    </para></listitem>
                 <listitem><para><emphasis>Establish the <filename>meta-intel</filename>
                     repository on your system</emphasis>:  Having local copies
                     of these supported BSP layers on your system gives you
                     access to layers you might be able to build on or modify
                     to create your BSP.
                     For information on how to get these files, see the
-                    "<link linkend='getting-setup'>Getting Set Up</link>" section.</para></listitem>
+                    "<link linkend='setting-up-bsp-layers'>Setting Up BSP Layers</link>" section.
+                    </para></listitem>
                 <listitem><para><emphasis>Create your own BSP layer using the
                     <ulink url='&YOCTO_DOCS_BSP_URL;#creating-a-new-bsp-layer-using-the-yocto-bsp-script'><filename>yocto-bsp</filename></ulink> script</emphasis>:
                     Layers are ideal for
@@ -475,8 +478,9 @@
                         <ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>
                         on your system gives you access to the build process and tools
                         you need.
-                        For information on how to get these files, see the bulleted item
-                        "<link linkend='local-yp-release'>Yocto Project Release</link>" earlier in this manual.
+                        For information on how to get these files, see the
+                        "<link linkend='cloning-the-poky-repository'>Cloning the <filename>poky</filename> Repository</link>"
+                        section.
                         </para></listitem>
                     <listitem><para><emphasis>Establish the temporary kernel source files</emphasis>:
                         Temporary kernel source files are kept in the

documentation/dev-manual/dev-manual-newbie.xml

@@ -326,7 +326,7 @@
                         "<ulink url='&YOCTO_DOCS_REF_URL;#yocto-project-repositories'>Yocto Project Source Repositories</ulink>"
                         section for information on these repositories.
                         See the
-                        "<link linkend='getting-setup'>Getting Set Up</link>"
+                        "<link linkend='working-with-yocto-project-source-files'>Working With Yocto Project Source Files</link>"
                         section for information on how to set up local Git
                         repositories for related upstream Yocto Project
                         Git repositories.

documentation/dev-manual/dev-manual-start.xml

@@ -14,236 +14,354 @@
     <ulink url='&YOCTO_DOCS_QS_URL;'>Yocto Project Quick Start</ulink>.
 </para>
 
-<section id='getting-setup'>
-    <title>Getting Set Up</title>
+<section id='setting-up-the-development-host-to-use-the-yocto-project'>
+    <title>Setting Up the Development Host to Use the Yocto Project</title>
 
     <para>
-        Here is what you need to use the Yocto Project:
-        <itemizedlist>
-            <listitem><para><emphasis>Host System:</emphasis>  You should have a reasonably current
-                Linux-based host system.
-                You will have the best results with a recent release of Fedora,
-                openSUSE, Debian, Ubuntu, or CentOS as these releases are frequently tested against the Yocto Project
-                and officially supported.
-                For a list of the distributions under validation and their status, see the
-                "<ulink url='&YOCTO_DOCS_REF_URL;#detailed-supported-distros'>Supported Linux Distributions</ulink>" section
-                in the Yocto Project Reference Manual and the wiki page at
-                <ulink url='&YOCTO_WIKI_URL;/wiki/Distribution_Support'>Distribution Support</ulink>.</para>
-                <para>
-                You should also have about 50 Gbytes of free disk space for building images.
-                </para></listitem>
-            <listitem><para><emphasis>Packages:</emphasis>  The OpenEmbedded build system
-                requires that certain packages exist on your development system (e.g. Python 2.7).
-                See "<ulink url='&YOCTO_DOCS_QS_URL;#packages'>The Build Host Packages</ulink>"
-                section in the Yocto Project Quick Start and the
-                "<ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-host-development-system'>Required Packages for the Host Development System</ulink>"
-                section in the Yocto Project Reference Manual for the exact
-                package requirements and the installation commands to install
-                them for the supported distributions.
-                </para></listitem>
-            <listitem id='local-yp-release'><para><emphasis>Yocto Project Release:</emphasis>
-                You need a release of the Yocto Project locally installed on
-                your development system.
-                The documentation refers to this set of locally installed files
-                as the <ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>.
-                You create your Source Directory by using
-                <ulink url='&YOCTO_DOCS_REF_URL;#git'>Git</ulink> to clone a local copy
-                of the upstream <filename>poky</filename> repository,
-                or by downloading and unpacking a tarball of an official
-                Yocto Project release.
-                The preferred method is to create a clone of the repository.
-                </para>
-                <para>Working from a copy of the upstream repository allows you
-                to contribute back into the Yocto Project or simply work with
-                the latest software on a development branch.
-                Because Git maintains and creates an upstream repository with
-                a complete history of changes and you are working with a local
-                clone of that repository, you have access to all the Yocto
-                Project development branches and tag names used in the upstream
-                repository.</para>
-                <note>You can view the Yocto Project Source Repositories at
-                    <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink>
+        This section provides procedures to set up your development host to
+        use the Yocto Project.
+        For a Linux system to use the Yocto Project, you need to be sure
+        you are running a supported Linux distribution and have the proper
+        host packages installed.
+        If you are using
+        <ulink url='https://git.yoctoproject.org/cgit/cgit.cgi/crops/about/'>CROPS</ulink>
+        that leverages
+        <ulink url='https://www.docker.com/'>Docker Containers</ulink>,
+        host setup differs from that of a native Linux machine.
+    </para>
+
+    <section id='setting-up-a-native-linux-host'>
+        <title>Setting Up a Native Linux Host</title>
+
+        <para role='writernotes'>
+            Need text - Following is some basics for a Linux host system.
+            This information needs to be worked in.
+        </para>
+
+        <para>
+            Setup consists of making sure you have a supported operating system,
+            installing host packages, and Here is what you need to use the Yocto Project:
+            <itemizedlist>
+                <listitem><para>
+                    <emphasis>Host System:</emphasis>
+                    You should have a reasonably current Linux-based host
+                    system.
+                    You will have the best results with a recent release of
+                    Fedora, openSUSE, Debian, Ubuntu, or CentOS as these
+                    releases are frequently tested against the Yocto Project
+                    and officially supported.
+                    For a list of the distributions under validation and their
+                    status, see the
+                    "<ulink url='&YOCTO_DOCS_REF_URL;#detailed-supported-distros'>Supported Linux Distributions</ulink>" section
+                    in the Yocto Project Reference Manual and the wiki page at
+                    <ulink url='&YOCTO_WIKI_URL;/wiki/Distribution_Support'>Distribution Support</ulink>.</para>
+                    <para>
+                    You should also have about 50 Gbytes of free disk space
+                    for building images.
+                    </para></listitem>
+                <listitem><para>
+                    <emphasis>Packages:</emphasis>
+                    The OpenEmbedded build system requires that certain
+                    packages exist on your development system
+                    (e.g. Python 2.7).
+                    See the
+                    "<ulink url='&YOCTO_DOCS_QS_URL;#packages'>Build Host Packages</ulink>"
+                    section in the Yocto Project Quick Start and the
+                    "<ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-host-development-system'>Required Packages for the Host Development System</ulink>"
+                    section in the Yocto Project Reference Manual for the
+                    exact package requirements and the installation commands
+                    to install them for the supported distributions.
+                    </para></listitem>
+            </itemizedlist>
+        </para>
+    </section>
+
+    <section id='setting-up-to-use-crops'>
+        <title>Setting Up to Use CROPS</title>
+
+        <para role='writernotes'>
+            Need text.
+            With CROPS, not sure what the basic package requirements are.
+            Need to find this out.
+        </para>
+    </section>
+
+    <section id='setting-up-bsp-layers'>
+        <title>Setting Up BSP Layers</title>
+
+        <para>
+            This section describes how to set up a layer for a Board Support
+            Package (BSP).
+            For structural information on BSPs, see the
+            <ulink url='&YOCTO_DOCS_BSP_URL;#bsp-guide'>Yocto Project Board Support Package (BSP) Developer's Guide</ulink>.
+            <orderedlist>
+                <listitem><para>
+                    <emphasis>Determine the BSP Layer You Want:</emphasis>
+                    The Yocto Project supports many BSPs, which are maintained in
+                    their own layers or in layers designed to contain several
+                    BSPs.
+                    To get an idea of machine support through BSP layers, you can
+                    look at the
+                    <ulink url='&YOCTO_RELEASE_DL_URL;/machines'>index of machines</ulink>
+                    for the release.
+                    <note>
+                        The Yocto Project uses the following BSP layer naming
+                        scheme:
+                        <literallayout class='monospaced'>
+     meta-<replaceable>bsp_name</replaceable>
+                        </literallayout>
+                        where <replaceable>bsp_name</replaceable> is the recognized
+                        BSP name.
+                        Here is an example:
+                        <literallayout class='monospaced'>
+     meta-raspberrypi
+                        </literallayout>
+                        See the
+                        "<ulink url='&YOCTO_DOCS_BSP_URL;#bsp-layers'>BSP Layers</ulink>"
+                        section in the Yocto Project Board Support Package (BSP)
+                        Developer's Guide for more information on BSP Layers.
+                    </note>
+                    </para></listitem>
+                <listitem><para>
+                    <emphasis>Optionally Set Up the <filename>meta-intel</filename> BSP Layer:</emphasis>
+                    If your hardware is based on current Intel CPUs and devices,
+                    you can leverage this BSP layer.
+                    For details on the <filename>meta-intel</filename> BSP layer,
+                    see the layer's
+                    <ulink url='http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel/tree/README'><filename>README</filename></ulink>
+                    file.
+                    <orderedlist>
+                        <listitem><para>
+                            <emphasis>Navigate to Your Source Directory:</emphasis>
+                            Typically, you set up the
+                            <filename>meta-intel</filename> Git repository
+                            inside the
+                            <ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>
+                            (e.g. <filename>poky</filename>).
+                            </para></listitem>
+                        <listitem><para>
+                            <emphasis>Clone the Layer:</emphasis>
+                            <literallayout class='monospaced'>
+     $ git clone git://git.yoctoproject.org/meta-intel.git
+     Cloning into 'meta-intel'...
+     remote: Counting objects: 14224, done.
+     remote: Compressing objects: 100% (4591/4591), done.
+     remote: Total 14224 (delta 8245), reused 13985 (delta 8006)
+     Receiving objects: 100% (14224/14224), 4.29 MiB | 2.90 MiB/s, done.
+     Resolving deltas: 100% (8245/8245), done.
+     Checking connectivity... done.
+                            </literallayout>
+                            </para></listitem>
+                        <listitem><para>
+                            <emphasis>Check Out the Proper Branch:</emphasis>
+                            The branch you check out for
+                            <filename>meta-intel</filename> must match the same
+                            branch you are using for the Yocto Project release
+                            (e.g. &DISTRO_NAME_NO_CAP;):
+                            <literallayout class='monospaced'>
+     $ git checkout <replaceable>branch_name</replaceable>
+                            </literallayout>
+                            For an example on how to discover branch names and
+                            checkout on a branch, see the
+                            "<link linkend='checking-out-by-branch-in-poky'>Checking Out By Branch in Poky</link>"
+                            section.
+                            </para></listitem>
+                    </orderedlist>
+                    </para></listitem>
+                <listitem><para>
+                    <emphasis>Optionally Set Up an Alternative BSP Layer:</emphasis>
+                    If your hardware can be more closely leveraged to an
+                    existing BSP not within the <filename>meta-intel</filename>
+                    BSP layer, you can clone that BSP layer.</para>
+
+                    <para>The process is identical to the process used for the
+                    <filename>meta-intel</filename> layer except for the layer's
+                    name.
+                    For example, if you determine that your hardware most
+                    closely matches the <filename>meta-minnow</filename>,
+                    clone that layer:
+                    <literallayout class='monospaced'>
+     $ git clone git://git.yoctoproject.org/meta-minnow
+     Cloning into 'meta-minnow'...
+     remote: Counting objects: 456, done.
+     remote: Compressing objects: 100% (283/283), done.
+     remote: Total 456 (delta 163), reused 384 (delta 91)
+     Receiving objects: 100% (456/456), 96.74 KiB | 0 bytes/s, done.
+     Resolving deltas: 100% (163/163), done.
+     Checking connectivity... done.
+                    </literallayout>
+                    </para></listitem>
+            </orderedlist>
+        </para>
+    </section>
+
+    <section id='local-kernel-files'>
+        <title>Setting Up to Work on a Kernel</title>
+
+        <para>
+            Kernel development is best accomplished using the
+            <filename>devtool</filename> tool and not through traditional
+            kernel workflow methods.
+            This section provides procedures for both.
+        </para>
+
+        <section id='getting-ready-to-develop-using-devtool'>
+            <title>Getting Ready to Develop using <filename>devtool</filename></title>
+
+            <para role='writernotes'>
+                Need the updated wiki stuff here
+            </para>
+        </section>
+
+        <section id='getting-ready-for-traditional-kernel-development'>
+            <title>Getting Ready for Traditional Kernel Development</title>
+
+            <para>
+                For traditional kernel development using the Yocto
+                Project, you need to establish local copies of the
+                kernel source.
+                You can find Git repositories of supported Yocto Project
+                kernels organized under "Yocto Linux Kernel" in the Yocto
+                Project Source Repositories at
+                <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink>.
+            </para>
+
+            <para>
+                This setup can involve creating a bare clone of the
+                Yocto Project kernel and then copying that cloned
+                repository.
+                You can create the bare clone and the copy of the bare
+                clone anywhere you like.
+                For simplicity, it is recommended that you create these
+                structures outside of the
+                <ulink url='&YOCTO_DOCS_REF_URL;source-directory'>Source Directory</ulink>,
+                which is usually named <filename>poky</filename>.
+            </para>
+
+            <para>
+                The following steps show how to create a bare clone of the
+                <filename>linux-yocto-4.4</filename> kernel and then
+                create a copy of that clone:
+                <note>
+                    When you have a local Yocto Project kernel Git
+                    repository, you can reference that repository rather than
+                    the upstream Git repository as part of the
+                    <filename>clone</filename> command.
+                    Doing so can speed up the process.
                 </note>
-                <para>The following transcript shows how to clone the
-                <filename>poky</filename> Git repository into the current
-                working directory.
-                The command creates the local repository in a directory
-                named <filename>poky</filename>.
-                For information on Git used within the Yocto Project, see
-                the "<ulink url='&YOCTO_DOCS_REF_URL;#git'>Git</ulink>" section.
-                <literallayout class='monospaced'>
-     $ git clone git://git.yoctoproject.org/poky
-     Cloning into 'poky'...
-     remote: Counting objects: 226790, done.
-     remote: Compressing objects: 100% (57465/57465), done.
-     remote: Total 226790 (delta 165212), reused 225887 (delta 164327)
-     Receiving objects: 100% (226790/226790), 100.98 MiB | 263 KiB/s, done.
-     Resolving deltas: 100% (165212/165212), done.
-                </literallayout></para>
-                <para>For another example of how to set up your own local Git
-                repositories, see this
-                <ulink url='&YOCTO_WIKI_URL;/wiki/Transcript:_from_git_checkout_to_meta-intel_BSP'>
-                wiki page</ulink>, which describes how to create local
-                Git repositories for both
-                <filename>poky</filename> and <filename>meta-intel</filename>.
-                </para>
-                <para>
-                You can also get the Yocto Project Files by downloading
-                Yocto Project releases from the
-                <ulink url="&YOCTO_HOME_URL;">Yocto Project website</ulink>.
-                From the website, you just click "Downloads" in the navigation
-                pane to the left to display all Yocto Project downloads.
-                Current and archived releases are available for download.
-                Nightly and developmental builds are also maintained at
-                <ulink url="&YOCTO_AB_NIGHTLY_URL;"></ulink>.
-                One final site you can visit for information on Yocto Project
-                releases is the
-                <ulink url='&YOCTO_WIKI_URL;/wiki/Releases'>Releases</ulink>
-                wiki.
-                </para></listitem>
-            <listitem id='local-kernel-files'><para><emphasis>Yocto Project Kernel:</emphasis>
-                If you are going to be making modifications to a supported Yocto Project kernel, you
-                need to establish local copies of the source.
-                You can find Git repositories of supported Yocto Project kernels organized under
-                "Yocto Linux Kernel" in the Yocto Project Source Repositories at
-                <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink>.</para>
-                <para>This setup can involve creating a bare clone of the Yocto Project kernel and then
-                copying that cloned repository.
-                You can create the bare clone and the copy of the bare clone anywhere you like.
-                For simplicity, it is recommended that you create these structures outside of the
-                Source Directory, which is usually named <filename>poky</filename>.</para>
-                <para>As an example, the following transcript shows how to create the bare clone
-                of the <filename>linux-yocto-3.19</filename> kernel and then create a copy of
-                that clone.
-                <note>When you have a local Yocto Project kernel Git repository, you can
-                reference that repository rather than the upstream Git repository as
-                part of the <filename>clone</filename> command.
-                Doing so can speed up the process.</note></para>
-                <para>In the following example, the bare clone is named
-                <filename>linux-yocto-3.19.git</filename>, while the
-                copy is named <filename>my-linux-yocto-3.19-work</filename>:
-                <literallayout class='monospaced'>
-     $ git clone --bare git://git.yoctoproject.org/linux-yocto-3.19 linux-yocto-3.19.git
-     Cloning into bare repository 'linux-yocto-3.19.git'...
-     remote: Counting objects: 3983256, done.
-     remote: Compressing objects: 100% (605006/605006), done.
-     remote: Total 3983256 (delta 3352832), reused 3974503 (delta 3344079)
-     Receiving objects: 100% (3983256/3983256), 843.66 MiB | 1.07 MiB/s, done.
-     Resolving deltas: 100% (3352832/3352832), done.
+                <orderedlist>
+                    <listitem><para>
+                        <emphasis>Create the Bare Clone:</emphasis>
+                        In the following example, the bare clone is named
+                        <filename>linux-yocto-4.4.git</filename>:
+                        <literallayout class='monospaced'>
+     $ git clone &dash;&dash;bare git://git.yoctoproject.org/linux-yocto-4.4 linux-yocto-4.4.git
+     Cloning into bare repository 'linux-yocto-4.4.git'...
+     remote: Counting objects: 4543903, done.
+     remote: Compressing objects: 100% (695618/695618), done.
+     remote: Total 4543903 (delta 3818435), reused 4541724 (delta 3816256)
+     Receiving objects: 100% (4543903/4543903), 801.08 MiB | 6.55 MiB/s, done.
+     Resolving deltas: 100% (3818435/3818435), done.
      Checking connectivity... done.
-                </literallayout></para>
-                <para>Now create a clone of the bare clone just created:
-                <literallayout class='monospaced'>
-     $ git clone linux-yocto-3.19.git my-linux-yocto-3.19-work
-     Cloning into 'my-linux-yocto-3.19-work'...
+                         </literallayout>
+                         </para></listitem>
+                    <listitem><para>
+                        <emphasis>Create the Copy of the Bare Clone:</emphasis>
+                        In the following command, the copy of the bare clone
+                        is named <filename>my-linux-yocto-4.4-work</filename>:
+                        <literallayout class='monospaced'>
+     $ git clone linux-yocto-4.4.git my-linux-yocto-4.4-work
+     Cloning into 'my-linux-yocto-4.4-work'...
      done.
-     Checking out files: 100% (48440/48440), done.
-                </literallayout></para></listitem>
-            <listitem id='meta-yocto-kernel-extras-repo'><para><emphasis>
-                The <filename>meta-yocto-kernel-extras</filename> Git Repository</emphasis>:
-                The <filename>meta-yocto-kernel-extras</filename> Git repository contains Metadata needed
-                only if you are modifying and building the kernel image.
-                In particular, it contains the kernel BitBake append (<filename>.bbappend</filename>)
-                files that you
-                edit to point to your locally modified kernel source files and to build the kernel
-                image.
-                Pointing to these local files is much more efficient than requiring a download of the
-                kernel's source files from upstream each time you make changes to the kernel.</para>
-                <para>You can find the <filename>meta-yocto-kernel-extras</filename> Git Repository in the
-                "Yocto Metadata Layers" area of the Yocto Project Source Repositories at
-                <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink>.
-                It is good practice to create this Git repository inside the Source Directory.</para>
-                <para>Following is an example that creates the <filename>meta-yocto-kernel-extras</filename> Git
-                repository inside the Source Directory, which is named <filename>poky</filename>
-                in this case:
-                <literallayout class='monospaced'>
+     Checking out files: 100% (52221/52221), done.
+                        </literallayout>
+                        </para></listitem>
+                    <listitem><para>
+                        <emphasis>Cloning the <filename>meta-yocto-kernel-extras</filename> Repository:</emphasis>
+                        The <filename>meta-yocto-kernel-extras</filename> Git
+                        repository contains Metadata needed only if you are
+                        modifying and building the kernel image.
+                        In particular, it contains the kernel BitBake append
+                        (<filename>.bbappend</filename>) files that you edit to
+                        point to your locally modified kernel source files and to
+                        build the kernel image.
+                        Pointing to these local files is much more efficient than
+                        requiring a download of the kernel's source files from
+                        upstream each time you make changes to the kernel.</para>
+
+                        <para>You can find the
+                        <filename>meta-yocto-kernel-extras</filename> Git
+                        Repository in the "Yocto Metadata Layers" area of the
+                        Yocto Project Source Repositories at
+                        <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink>.
+                        It is good practice to create this Git repository
+                        inside the Source Directory.</para>
+
+                        <para>Following is an example that creates the
+                        <filename>meta-yocto-kernel-extras</filename> Git
+                        repository inside the Source Directory, which is named
+                        <filename>poky</filename>, in this case:
+                        <literallayout class='monospaced'>
      $ cd ~/poky
      $ git clone git://git.yoctoproject.org/meta-yocto-kernel-extras meta-yocto-kernel-extras
      Cloning into 'meta-yocto-kernel-extras'...
      remote: Counting objects: 727, done.
      remote: Compressing objects: 100% (452/452), done.
      remote: Total 727 (delta 260), reused 719 (delta 252)
-     Receiving objects: 100% (727/727), 536.36 KiB | 240 KiB/s, done.
+     Receiving objects: 100% (727/727), 536.36 KiB | 0 bytes/s, done.
      Resolving deltas: 100% (260/260), done.
-               </literallayout></para></listitem>
-           <listitem><para id='supported-board-support-packages-(bsps)'><emphasis>Supported Board Support Packages (BSPs):</emphasis>
-                The Yocto Project supports many BSPs, which are maintained in
-                their own layers or in layers designed to contain several
-                BSPs.
-                To get an idea of machine support through BSP layers, you can
-                look at the
-                <ulink url='&YOCTO_RELEASE_DL_URL;/machines'>index of machines</ulink>
-                for the release.</para>
-
-                <para>The Yocto Project uses the following BSP layer naming
-                scheme:
-                <literallayout class='monospaced'>
-     meta-<replaceable>bsp_name</replaceable>
-                </literallayout>
-                where <replaceable>bsp_name</replaceable> is the recognized
-                BSP name.
-                Here is an example:
-                <literallayout class='monospaced'>
-     meta-raspberrypi
-                </literallayout>
-                See the
-                "<ulink url='&YOCTO_DOCS_BSP_URL;#bsp-layers'>BSP Layers</ulink>"
-                section in the Yocto Project Board Support Package (BSP)
-                Developer's Guide for more information on BSP Layers.</para>
-
-                <para>A useful Git repository released with the Yocto
-                Project is <filename>meta-intel</filename>, which is a
-                parent layer that contains many supported
-                <ulink url='&YOCTO_DOCS_BSP_URL;#bsp-layers'>BSP Layers</ulink>.
-                You can locate the <filename>meta-intel</filename> Git
-                repository in the "Yocto Metadata Layers" area of the Yocto
-                Project Source Repositories at
-                <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink>.</para>
-
-                <para>Using
-                <ulink url='&YOCTO_DOCS_REF_URL;#git'>Git</ulink> to create a local clone of the
-                upstream repository can be helpful if you are working with
-                BSPs.
-                Typically, you set up the <filename>meta-intel</filename>
-                Git repository inside the Source Directory.
-                For example, the following transcript shows the steps to clone
-                <filename>meta-intel</filename>.
-                <note>
-                    Be sure to work in the <filename>meta-intel</filename>
-                    branch that matches your
-                    <ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>
-                    (i.e. <filename>poky</filename>) branch.
-                    For example, if you have checked out the "master" branch
-                    of <filename>poky</filename> and you are going to use
-                    <filename>meta-intel</filename>, be sure to checkout the
-                    "master" branch of <filename>meta-intel</filename>.
-                </note>
-                <literallayout class='monospaced'>
-     $ cd ~/poky
-     $ git clone git://git.yoctoproject.org/meta-intel.git
-     Cloning into 'meta-intel'...
-     remote: Counting objects: 11917, done.
-     remote: Compressing objects: 100% (3842/3842), done.
-     remote: Total 11917 (delta 6840), reused 11699 (delta 6622)
-     Receiving objects: 100% (11917/11917), 2.92 MiB | 2.88 MiB/s, done.
-     Resolving deltas: 100% (6840/6840), done.
      Checking connectivity... done.
-                </literallayout></para>
+                        </literallayout>
+                        </para></listitem>
+                </orderedlist>
+            </para>
+        </section>
+    </section>
 
-                <para>The same
-                <ulink url='&YOCTO_WIKI_URL;/wiki/Transcript:_from_git_checkout_to_meta-intel_BSP'>wiki page</ulink>
-                referenced earlier covers how to set up the
-                <filename>meta-intel</filename> Git repository.
-                </para></listitem>
-            <listitem><para><emphasis>Eclipse Yocto Plug-in:</emphasis>  If you are developing
-                applications using the Eclipse Integrated Development Environment (IDE),
-                you will need this plug-in.
-                See the
-                "<ulink url='&YOCTO_DOCS_SDK_URL;#sdk-appendix-latest-yp-eclipse-plug-in'>Using Eclipse</ulink>"
-                section in the Yocto Project Software Development Kit (SDK)
-                Developer's Guide for more information.</para></listitem>
-        </itemizedlist>
-    </para>
+    <section id='setting-up-to-use-eclipse'>
+        <title>Setting Up to Use Eclipse</title>
+
+        <para>
+            This section presents the steps needed to set up your host if you
+            are going to be using the popular
+            <trademark class='trade'>Eclipse</trademark> IDE.
+            The steps in this procedure are links to sections in the
+            Yocto Project Software Development Kit (SDK) Developer's Guide
+            that provide detailed procedures given the Neon version of
+            Eclipse.
+            For procedures on the entire development process using
+            Eclipse, see the
+            "<ulink url='&YOCTO_DOCS_SDK_URL;#sdk-developing-applications-using-eclipse'>Developing Applications Using Eclipse</ulink>"
+            section in the Yocto Project Software Development Kit (SDK)
+            Developer's Guide.
+            <orderedlist>
+                <listitem><para>
+                    <emphasis>Install Eclipse:</emphasis>
+                    See the
+                    "<ulink url='&YOCTO_DOCS_SDK_URL;#neon-installing-eclipse-ide'>Installing the Neon Eclipse IDE</ulink>"
+                    section.
+                    </para></listitem>
+                <listitem><para>
+                    <emphasis>Configure Eclipse:</emphasis>
+                    See the
+                    "<ulink url='&YOCTO_DOCS_SDK_URL;#neon-configuring-the-mars-eclipse-ide'>Configuring the Neon Eclipse IDE</ulink>"
+                    section.
+                    </para></listitem>
+                <listitem><para>
+                    <emphasis>Configure Eclipse:</emphasis>
+                    See the
+                    "<ulink url='&YOCTO_DOCS_SDK_URL;#neon-installing-the-eclipse-yocto-plug-in'>Installing or Accessing the Neon Eclipse Yocto Plug-in</ulink>"
+                    section.
+                    </para></listitem>
+                <listitem><para>
+                    <emphasis>Configure Eclipse:</emphasis>
+                    See the
+                    "<ulink url='&YOCTO_DOCS_SDK_URL;#neon-configuring-the-eclipse-yocto-plug-in'>Configuring the Neon Eclipse Yocto Plug-in</ulink>"
+                    section.
+                    </para></listitem>
+            </orderedlist>
+        </para>
+    </section>
 </section>
 
 <section id='working-with-yocto-project-source-files'>
@@ -399,6 +517,32 @@
     <section id='cloning-the-poky-repository'>
         <title>Cloning the <filename>poky</filename> Repository</title>
 
+        <para>
+            To use the Yocto Project, you need a release of the Yocto Project
+            locally installed on your development system.
+            The locally installed set of files is referred to as the
+            <ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>
+            in the Yocto Project documentation.
+        </para>
+
+        <para>
+            You create your Source Directory by using
+            <ulink url='&YOCTO_DOCS_REF_URL;#git'>Git</ulink> to clone a local
+            copy of the upstream <filename>poky</filename> repository.
+            <note><title>Tip</title>
+                The preferred method of getting the Yocto Project Source
+                Directory set up is to clone the repository.
+            </note>
+            Working from a copy of the upstream repository allows you
+            to contribute back into the Yocto Project or simply work with
+            the latest software on a development branch.
+            Because Git maintains and creates an upstream repository with
+            a complete history of changes and you are working with a local
+            clone of that repository, you have access to all the Yocto
+            Project development branches and tag names used in the upstream
+            repository.
+        </para>
+
         <para>
             Follow these steps to create a local version of the
             upstream

documentation/mega-manual/mega-manual.xml

@@ -214,7 +214,7 @@
         xmlns:xi="http://www.w3.org/2003/XInclude" href="../ref-manual/usingpoky.xml"/>
 
     <xi:include
-        xmlns:xi="http://www.w3.org/2003/XInclude" href="../ref-manual/closer-look.xml"/>
+        xmlns:xi="http://www.w3.org/2003/XInclude" href="../ref-manual/ref-development-environment.xml"/>
 
     <xi:include
         xmlns:xi="http://www.w3.org/2003/XInclude" href="../ref-manual/technical-details.xml"/>

documentation/mega-manual/mega-style.css

@@ -731,6 +731,11 @@ div.navfooter {
 }
 
 
+.writernotes {
+  color: red;
+}
+
+
   /*********** /
  /  graphics  /
 / ***********/

documentation/ref-manual/introduction.xml

@@ -594,7 +594,7 @@
         You can set up the Source Directory by cloning a copy of the upstream
         <ulink url='&YOCTO_DOCS_DEV_URL;#poky'>poky</ulink> Git repository.
         For information on how to do this, see the
-        "<ulink url='&YOCTO_DOCS_DEV_URL;#getting-setup'>Getting Set Up</ulink>"
+        "<ulink url='&YOCTO_DOCS_DEV_URL;#working-with-yocto-project-source-files'>Working With Yocto Project Source Files</ulink>"
         section in the Yocto Project Development Manual.
     </para>
 </section>

documentation/ref-manual/ref-development-environment.xml

@@ -333,7 +333,7 @@
             Once you have a local copy of a repository, you can take steps to
             develop locally.
             For examples on how to clone Git repositories, see the
-            "<ulink url='&YOCTO_DOCS_DEV_URL;#getting-setup'>Getting Set Up</ulink>"
+            "<ulink url='&YOCTO_DOCS_DEV_URL;#working-with-yocto-project-source-files'>Working With Yocto Project Source Files</ulink>"
             section in the Yocto Project Development Manual.
         </para>
 

documentation/ref-manual/ref-structure.xml

@@ -14,8 +14,9 @@
 </para>
 
 <para>
-    For information on how to establish a local Source Directory on your development system, see the
-    "<ulink url='&YOCTO_DOCS_DEV_URL;#getting-setup'>Getting Set Up</ulink>"
+    For information on how to establish a local Source Directory on your
+    development system, see the
+    "<ulink url='&YOCTO_DOCS_DEV_URL;#working-with-yocto-project-source-files'>Working With Yocto Project Source Files</ulink>"
     section in the Yocto Project Development Manual.
 </para>
 

documentation/yocto-project-qs/yocto-project-qs.xml

@@ -423,8 +423,8 @@
             <para>
                 For more information on getting set up with the Yocto Project
                 release, see the
-                "<ulink url='&YOCTO_DOCS_DEV_URL;#local-yp-release'>Yocto Project Release</ulink>"
-                item in the Yocto Project Development Manual.
+                "<link linkend='cloning-the-poky-repository'>Cloning the <filename>poky</filename> Repository</link>"
+                section in the Yocto Project Development Manual.
             </para>
         </section>
     </section>