Home Esplora Aiuto
Accedi
crispAudio
/
poky
mirror da git://git.yoctoproject.org/poky
5
0
Forka 0
File Problemi 0 Wiki
Albero (Tree): 34f0052af3
Rami (Branch) Tag
poky
/
meta-yocto-bsp
/
lib
/
oeqa
/
runtime
/
cases
/
parselogs-ignores-genericarm64.txt

parselogs-ignores-genericarm64.txt 2.4 KB
Cronologia Originale

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960 
  1. # AMD KV260 with u-boot 2025.10rc2 based firmware
    2. 

  2. # safe to ignore minor firmware issue
    3. 

  3. zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: failed to set: pin
    4. 

  4. zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: set mux failed for pin
    5. 

  5. request failed for node
    6. 

  6. error -EACCES: failed to add to PM domain domain
    7. 

  7. probe with driver sdhci-arasan failed with error
    8. 

  8. Error applying setting, reverse things back
    9. 

  9. # safe to ignore initrd warning
    10. 

  10. Can't lookup blockdev
    11. 

  11. # X11 fails to start without connected display
    12. 

  12. modeset(0): failed to set mode: Invalid argument
    13. 

  13. 

  14. # Rockpi4b with u-boot 2025.10rc2 based firmware
    15. 

  15. memory-controller: probe with driver rk3399-dmc-freq failed with error
    16. 

  16. probe with driver rockchip-pcie failed with error
    17. 

  17. platform hdmi-sound: deferred probe pending: asoc-simple-card: parse error
    18. 

  18. deferred probe pending: rockchip-spi: Failed to request optional TX DMA channel
    19. 

  19. platform sound: deferred probe pending: asoc-audio-graph-card: parse error
    20. 

  20. platform sound-dit: deferred probe pending: asoc-audio-graph-card: parse error
    21. 

  21. 

  22. # AMD zcu102 with u-boot 2025.10rc2 based firmware
    23. 

  23. # optee not available on all devices
    24. 

  24. optee firmware:optee: probe with driver optee failed with error
    25. 

  25. # SPI device probe error
    26. 

  26. spi_master spi0: Failed to create SPI device for
    27. 

  27. # PHY clock not correct
    28. 

  28. deferred probe pending: xilinx-psgtr: Failed to get ref clock
    29. 

  29. 

  30. # TI k3 am62p5-sk with u-boot 2024.04-ti
    31. 

  31. # small issue in devicetree
    32. 

  32. OPP table can't be empty
    33. 

  33. 

  34. # NXP imx8mp verdin with u-boot 2025.10rc2
    35. 

  35. # RTC detection issue
    36. 

  36. oscillator failed, set time!
    37. 

  37. # uart issue
    38. 

  38. serial: failed to get ipg clk
    39. 

  39. # GPIO driver/dt issue
    40. 

  40. failed writing register: -6
    41. 

  41. # Audio codec issue
    42. 

  42. nau8822 3-001a: Failed to issue reset
    43. 

  43. # Audio devicetree issue
    44. 

  44. platform sound: deferred probe pending: asoc-simple-card: parse error
    45. 

  45. 

  46. # Broadcom Rpi4 with u-boot 2025.10rc2
    47. 

  47. # wifi firmware issue
    48. 

  48. Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed
    49. 

  49. 

  50. # Qualcomm rb3gen2 with u-boot 2025.10rc2 based firmware
    51. 

  51. # PMIC issue
    52. 

  52. qcom_pmic_glink pmic-glink: Failed to create device link
    53. 

  53. # i2c issue
    54. 

  54. geni_i2c 980000.i2c: error -ENXIO: Invalid proto
    55. 

  55. geni_i2c 984000.i2c: error -ENXIO: Invalid proto
    56. 

  56. # wifi issues
    57. 

  57. ath11k 17a10040.wifi: failed to get rproc:
    58. 

  58. # drm issue
    59. 

  59. auxiliary aux_bridge.aux_bridge.0: deferred probe pending: aux_bridge.aux_bridge: failed to acquire drm_bridge
    60. 

  60. auxiliary pmic_glink.altmode.0: deferred probe pending: pmic_glink_altmode.pmic_glink_altmode: failed to acquire retimer-switch for port
    61.